Advantages and Disadvantages of Dye Sublimation Printing on Fabric Banners

Dye sublimation uses dyes, as I said, and a CMYO dye cartridge set that replace the black in CMYK printing with an “Overprint Clear.” The inkjet printer that is set up to print dyes (this cannot be done interchangeably without a significant amount of know-how and expense, so once a printer is set up to print dyes, it is usually not converted back to standard CMYK inkjet printing) prints a mirror image of whatever it is that needs printed on a treated dye-accepting paper known generically as “transfer paper.”

This paper is now “married” to a piece of polyester or another synthetic fabrics (polyester is the most common due to its versatility in look and usage – from stretchable trade show booth fabrics to garments to outdoor flags and a whole lot more) and then it is fed through heated rollers that combine heat – about 375°F or 210°C – with pressure to expand the cells of the fabric and convert the dye to a gaseous state.

The dye is sublimation printing dubai into the open pores of the polymeric synthetic material, and as it cools again, traps the sublimated dye within the cells of the fabric. Because the dye became gaseous, it does not create a dot pattern during the sublimation process like inkjet printing will on fabric or vinyl or other rigid plastic substrates, rather it creates a continuous tone print much like how photographs are developed and look.

So, now that I’ve explained the basic difference between dye sublimation printing and inkjet printing, I’ll address the original question of the advantages or disadvantages of both. As you may know, I don’t think there’s a lot of disadvantages to dye sublimation printing on fabric, but I’ll give you the two that I can think of off the top of my head. First, it is slower than inkjet printing because you have two processes in the heat transfer part of dye sublimation, so labor costs are going to be higher to some degree, although there are now printers that have the fabric and paper inline and they are drawn into the heated rollers as the printer continues to print.

The second disadvantage is also a production issue that is being solved by the newer printer/roller units just explained in the previous paragraph. In the past, and still in the present, it is not uncommon for the fabric to get a crease or wrinkle in it, or the paper, and suddenly the whole transfer print and piece of fabric are ruined. You would have to start over. Many of those who have been at this for awhile and are using older equipment charge higher prices per square foot for wider material, but many also don’t who have the newer equipment.

Leave a Reply

Your email address will not be published.